Go BottomHydrolics
 | Darin
Join Date: Posts: 1 
|
1999-12-02 10588
I have a 1500 ford and the hydrolics(3 point hitch) simply quit working. Oneday they were fine the next they would not do anything. I have changed the oil but don't know what else might be wrong with it. I am fairly new with tractors and I need as much help as I can get. I know nothing of hydrolics but am ready to learn.Thank you in advance for any help you can give me.
Reply to |
Quote Reply |
Add PhotoHydrolics
| Sid
Join Date: Posts: 1
|
1999-12-02 10591
I had a similar problem with my Ford 1700. I took it to the dealer. Turned out the hydraulic filter was stopped up. I hope that is all that is wrong with yours. ....
Reply to |
Quote Reply |
Add PhotoHydrolics
| Ted
Join Date: Posts: 1
|
1999-12-03 10612
It could also be a stuck (open) by-pass valve, which is usually caused when the filter (hydaulic) is clogged and the system goes into by-pass mode. Or else the by-pass (sometimes called relief valve also) is broken, the spring in them is notorius for just letting go, several times this has happened to me, it is not a major thing to fix. If you can't remember (or don't know when the fluid and filter were last changed, change it now, it can't hurt. Best of luck. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This